Product Description
The UAV detection system is a low altitude security system that uses cognitive radio Protocol Cracking (CRPC) technology to solve the detection, identification and positioning of domestic and foreign civil UAVs. The system can passively detect, accurately identify, distinguish between friend and foe, and provide early warning and prediction for unmanned aerial vehicles in protected areas (with optional direction finding functions as needed). It can be used for low altitude security defense in airports, prisons, important industrial facility bases, sports venues, and major event venues.
CRPC technology is the fourth generation UAV defense method. This technical means monitors the radio environment in the defense area through the antenna array, collects radio signals in the defense area 24 hours a day, transmits the collected signals to the signal processing unit, accurately demodulates and decodes the UAV signals, and then transmits the analyzed UAV signals to the data server through the network, The data server manages the received drone signals uniformly, detects and alerts the "black flying" drones, and manages the drone black and white list based on the electronic fingerprint ID.
Detailed Photos
Product Parameters
| Item |
Specification |
| Passive Detection |
Detection Frequency |
Range:
25MHz~6000MHz ( which can be customrized )
|
| Detection Range |
1.5km |
| Direction time |
without 1s |
WIDEBAND JAMMING
Note:The detection range is the recognition distance, and the detection performances are values under typical working conditions in open and unobstructed conditions.
Product Function
| Module |
Description |
| Passive detection |
The system only passively receives and does not emit any electromagnetic signals, and can detect the drone model and its electronic fingerprint |
| Accurate recognition |
Can accurately identify different drones of the same brand, model, and frequency band |
| Precise |
A single system can realize the uav target position |
| Defense |
/ |
localization
|
indication(has limitation on models supported)
|
| Black & White List |
The black and white list can be marked with one click, and the black-flying drones can be attacked, and the white-listed drones will not be interfered. |
| Full model library |
Supports the full range of DJI, mainstream brands in the market and DIY drones, covering more than 98% of mainstream models in the market. |
| Direction finding models |
New DJI drones, and some Autel |
| Patch tracking |
With the function of multi-target trajectory tracking, and multiple drones can be displayed in different colors when detected at the same time; |
| Invasion alarm |
When the device detects a drone invasion, it will alarm by sound and light; |
| Pilot positioning |
It can accurately determine the position of the UAV (the remote control) and indicate the corresponding location; |
| Intelligent platform |
Android OS, with finger touch to operate. |
Working Environment
| Item |
Specification |
| Operating temperature |
-30ºC~+55ºC
|
| Operating Humidity |
RH (93±3)% |
| Atmospheric pressure |
86kPa to 106kPa |
| Rated voltage |
DC12V ±10%
|
| Power Consumption |
50W |
| Power Supply mode |
internal battery |
|
Built-in power supply
|
DC12V 10000mA
|
Mechanical Characteristics
| |
| 1. UAV suitcase detection device |
| processing unit |
|
| Contents |
Data |
| Length |
165mm |
| Width |
85mm |
| Height |
49mm |
| Mainhost weight |
≤600g
|
|
Note: The above size is the shape size of the detection box under the closed state; |
|
Stable Characteristics
| Item |
Specification |
| Shell Protection |
IP66 |
| Continuously working |
4 Hours
|
Technical standard
|
GJB 6724-2009
|
RF Characteristics
| Item |
Specification |
| Detected Bands |
2.4GHz,5. 8GHz |
| Detection Scope |
360° |
| Detection Distance |
1.5KM |
| Tolerance of radiation intensity of environmental electromagnetic waves |
Compliance with the requirements of GB8702-2014, Electromagnetic Environment Control Limits |
| Detection mode |
Panoramic scan, and the channel scan |
Device deployment
Choose a wide-view field outdoors and start deploying equipment. Before the equipment is unfolded for use, check the specifications and quantities of all accessories and standard parts according to the equipment list, and assemble them step by step according to the installation steps below.
The usage environment of the device Select a wide-view field outdoors, and turn on the equipment for use. Usually choose outdoor open land or the top of the building, when using it need to pay attention to whether there are obvious obstructions around and buildings with strong interference
equipment.
Antenna connection
The receiving band antenna is screwed clockwise to the radio processing unit according to the corresponding interface identified on the antenna and the radio host unit. Note: Different equipment may be slightly different, when connecting the antenna, you must use the equipped antenna and the radio host unit to connect, otherwise the system will cause damage to the radio host unit after it is turned on.
Power and network access
Network access: The device supports linking wireless networks or placing 4G cards to link 4G
networks;
Power Access: The device has a built-in lithium battery, which can be charged through the original power adapter and Type-C charging interface cable; DC12V DC input, can be accessed by fixed power supply or mobile power supply;
Description of the accusation system
The device host has a built-in budget processing unit and supports loading the
accusation platform system, supports access and control of other device browsers in
the LAN, supports multi-screen and multi-device monitoring, but does not support
third-party system environments.
Operating instructions
(1)System starting
After the equipment is powered on, the display interface automatically starts the UAV
defense system and enters the main interface of the defense system, and the main
page is divided into three functional areas: menu operation area, electronic map area,
and information display area, as shown in Figure 3-1;
Image1The main interface of the UAV defense system
Pay attention:After entering the system, the main interface of the system does not display the electronic map, it is displayed as a white screen, at this time, the functional controller of the device is in the startup state and the search GPS needs to respond for a period of time (about 20-30s);
Passive detection and positioning
After the device detects the drone, the system will automatically send out an alarm, and at the same time, display the drone, pilot (remote control) logo and approximate location in the electronic map area; the information display area at the bottom of the interface displays the detected drone's brand, Model, electronic ID (serial number), flight frequency, flight altitude, latitude and longitude, intrusion direction, reference
distance, and pilot (remote controller) latitude and longitude, intrusion direction, reference distance and other information.
1.UAV information display
As shown in Figure 3-2, the UAV information display box is displayed in turn as follows: UAV brand, electronic ID (airframe serial number), flight frequency, flight altitude, latitude and longitude, intrusion direction, reference distance; Pilot (remote control) latitude and longitude, intrusion direction, reference distance;
1. The current quantity of detected drones
Display the total number of drones currently detected by the device;
2. The number of drones detected in history
Display the number of drones detected by the device in the recent period, and multiple time periods can be set (within 30 minutes, within 1 hour,
within 2 hours, within 4 hours, within 8 hours, within 24 hours and all history);
Basic Troubleshooting
a) Confirm that the main unit of the device is turned on and whether the built-in battery of the device is still charged;
b) Make sure that the antennas of all devices are firmly connected to the corresponding ports;
c) Make sure the power cable is not damaged or frayed;
d) Reboot the device and check if the problem persists;
e) After the device is turned on, confirm whether the "device management" process (controller, computing engine, sensor) in the server interface is working normally.
f) If the fault still cannot be rectified, please contact our technical staff, and do not disassemble the case without permission.
Precautions for use
a) After confirming that the detection antenna of the device is connected normally, it can be powered on. It is strictly forbidden to use the power before the detection antenna is installed.
b) In order to ensure the service life of the equipment, the minimum power of the equipment in daily use should not be less than 10%;
c) In order to use the device safely, it must be charged when the device is turned off. The charging time is ≯6 hours. After the device is fully charged, the device can be used after unplugging the power supply;
d) Do not use the device while charging, in case the device overheats and causes the battery to explode;
e) In order to ensure the normal operation of the equipment, it is strictly forbidden to install other software that has nothing to do with the operating system on this terminal, such as software system problems caused by the random installation of software by customers are not covered by the warranty.
f) Do not insert and use external U disks, mobile hard disks, etc. on the device side, and do not change the date and time of the system casually
g) This product is highly technical equipment. If the system breaks down during use, you should notify our company's after-sales service department in time. Do not disassemble it at will, so as not to damage the internal structure or damage your rights and interests due to improper operation.
h) Please use this product within the scope permitted by national laws and regulations. Any adverse consequences caused by violation of laws and regulations shall be borne by the customer
Packaging & Shipping
Each main spare part into air box. Can deliver directly with air box, or adding additional wooden package.
Delivery means: By Express / Air / Sea.
a) The packaging box meets the requirements of moisture-proof and shock-proof, and the packaging box should have packing list, inspection certificate and product manual and other items.
b) During transportation, avoid throwing, falling, sun and rain, and avoid mixed transportation of corrosive substances.
c) The product should be stored in a cool, ventilated, and dry warehouse. It is forbidden to store it together with oily substances and keep away from heat sources. When stacking, it should be 20cm away from the ground and 20cm away from the wall.
Company Profile
Our company offers a wide range of advanced anti-UAV products for early detection, identification and tracking of UAVs, assessment of level of threat and adequate response actions including drone counteraction and neutralization. Counter-UAV products supplied by our company can be used separately or as part of complex integrated Anti-UAV defence systems, which is highly recommended for assuring complete and reliable protection.
We help our customers to choose the most appropriate anti-drone products based on clients´ requirements and type and size of location or facility that has to be protected. We are constantly searching for new anti-drone technologies to enhance our list of anti-drone products.
Our Advantages
Why Choose Us
1> Our supply is enough to meet the needs of customers, and a variety of UAV defense solutions can meet the needs of most people.
2> Here you can buy the drone detection/countermeasure system you are interested in, and customers can enjoy the long-term technical consulting service of our company.
3> We offer the OEM/ODM services for our products meet your special needs.
4> We offer instant service with new drone detection adding service, and software team keeps on increasing drones that can support to detect.
5> There is a long-term cooperation with the shipping couriers, can make the goods more quickly and efficiently deliver.
6> We will provide best after sale service for the customers. You are welcomed to visit our factory and have some training for the operation. Anyway, we will try our best to meet your requirements.
7> We can help you to pass your official certifications.
After Sales Service
1>Factory training and remote training on installation and operation.
2>1 year remote software upgrade and long term remote troubleshooting.
3> 7*24H contact for support.
4> Engineering team support for unrecognized drone adding when require.
5> Customization and future customization after usage.
Audited Supplier 
){kind=link}
){kind=link}