Product Description
The UAV detection and direction finding integrated system adopts Cognitive Radio Protocol Cracking (CRPC) technology to solve the detection, identification, direction finding, and orientation of civilian UAVs. At the same time, the real-time position of the target UAV and the pilot is determined, and the flight trajectory of the UAV is tracked in real time. It can be used in aviation airports, prisons, important industrial facilities, national defense, public security areas, sports venues and major events.
The cognitive radio protocol cracking technology is the fourth-generation UAV defense method. This technology uses an antenna array to monitor the radio environment in the defense area, and continuously collects radio signals in the defense area for 24 hours. The signal is transmitted to the signal processing unit to accurately demodulate and decode the UAV signal, and then the analyzed UAV signal is transmitted to the data server through the network, and the data server performs unified management of the received UAV signal to UAVs flying illegally and privately carry out interference countermeasures.
Detailed Photos
Product Parameters
1.1List of Supporting Equipment
| Name |
Quantity |
Description |
| Mainhost |
1 |
For radio signal processing, and control terminal display |
| Radio receiving antenna (rod shape) |
4 |
For radio signal reception |
| Power Cable |
1 |
For power charging and direct AC power supply |
| Packing Box |
1 |
For packing |
Note: please deploy the equipment at outdoor environment, and connect the antennas with the radio processing unit according to the physical identification.
1.2 Product Function
| Function |
Description |
| Passive detection |
The system only passively receives and does not emit any electromagnetic signals, and can detect the drone model and its electronic fingerprint |
| Accurate recognition |
Can accurately identify different drones of the same brand, model, and frequency band |
| Precise localization |
A single system can realize the uav target position indication(has limitation on models supported) |
| Black & White List |
The black and white list can be marked with one click, and the black-flying drones will be alarmed, and the white-listed drones will not be interfered. |
| Full model library |
Supports the full range of DJI, mainstream brands in the market and DIY drones, covering more than 98% of mainstream models in the market.(for detection, not for direction finding) |
| Direction finding models |
New DJI drones, and some Autel |
| Patch tracking |
With the function of multi-target trajectory tracking, and multiple drones can be displayed in different colors when detected at the same time; |
| Invasion alarm |
When the device detects a drone invasion, it will alarm by sound and light; |
| Pilot positioning |
It can accurately determine the position of the UAV (the remote control) and indicate the corresponding location; |
| Intelligent platform |
Android OS, with finger touch to operate. |
1.3 Working Environment
| Item |
Specification |
| Operating temperature |
-20ºC~+65ºC |
| Operating Humidity |
RH (93±3)% |
| Atmospheric pressure |
86kPa to 106kPa |
| Power Consumption |
50W |
| Power Supply mode |
AC power and internal battery |
| Rated voltage |
220V±22VAC50Hz±lHz/60Hz±lHz |
| Internal Battery |
DC12V 54AH |
1.4 Mechanical Characteristics
| Contents |
Data |
| Length |
470mm |
| Width |
357mm |
| Height |
176mm |
| Mainhost weight |
W12kg |
Note: The above size is the shape size of the detection box under the closed state;
1.5 Stable Characteristics
| Item |
Specification |
| Shell Protection |
IP66 |
| Continuously working |
More than 10 hours after full charge for internal battery / Unlimited for AC power supply. |
| Technical standard |
Meet the requirements specified in 5.10 of GJB 6724-2009 |
1.6 Radio Frequency Characteristics
| Item |
Specification |
| Detected Bands |
900MHz,1.4GHz,2.4GHz,5.2GHz,5. 8GHz |
| Detection Scope |
360° |
| Detection Distance |
5KM(affected by environment) |
| Tolerance of radiation intensity of environmental electromagnetic waves |
Compliance with the requirements of GB8702-2014, Electromagnetic Environment Control Limits |
| Detection mode |
Panoramic scan, and the channel scan |
2. Device Erection and Deployment
Select a wide-view field outdoors, and start to deploy and use the equipment. Before using the equipment, first check the specifications and quantity of standard parts according to the equipment list points, and then assemble them according to the installation steps below.
2.1 Operation Environment
Select a suitable site outdoors and deploy the equipment for use. Usually selected in the outdoor open highland or the top of the building, pay attention to whether there is obvious shielding and the building with strong interference equipment.
2.2 Antenna Connection
The receiving frequency band antenna is screwed to the radio processing unit in a clockwise direction one by one according to the corresponding interface identified on the antenna and the radio processing unit. The antenna in the same frequency band can be used, and the detection antenna in different frequency bands cannot be used.
Note: When connecting the antenna, connect the antenna and radio processing unit according to the interface identification, otherwise the damage will be caused to the radio processing unit after the system is turned on.
2.3 Power and internet connection
(1) Network access:
The radio processing unit can be connected to the host terminal through TCP / IP interface using optical fiber or standard network cable; or link the device to the wireless network or 4G network;
- Power supply access:
Equipment internal a battery, direct power supply;
220V AC input, which can be accessed by fixed power supply or UPS power supply
Packaging & Shipping
Each main spare part into air box. Can deliver directly with air box, or adding additional wooden package.
Delivery means: By Express / Air / Sea.
Company Profile
Our company offers a wide range of advanced anti-UAV products for early detection, identification and tracking of UAVs, assessment of level of threat and adequate response actions including drone counteraction and neutralization. Counter-UAV products supplied by our company can be used separately or as part of complex integrated Anti-UAV defence systems, which is highly recommended for assuring complete and reliable protection.
We help our customers to choose the most appropriate anti-drone products based on clients´ requirements and type and size of location or facility that has to be protected. We are constantly searching for new anti-drone technologies to enhance our list of anti-drone products.
Our Advantages
Why Choose Us
1> Our supply is enough to meet the needs of customers, and a variety of UAV defense solutions can meet the needs of most people.
2> Here you can buy the drone detection/countermeasure system you are interested in, and customers can enjoy the long-term technical consulting service of our company.
3> We offer the OEM/ODM services for our products meet your special needs.
4> We offer instant service with new drone detection adding service, and software team keeps on increasing drones that can support to detect.
5> There is a long-term cooperation with the shipping couriers, can make the goods more quickly and efficiently deliver.
6> We will provide best after sale service for the customers. You are welcomed to visit our factory and have some training for the operation. Anyway, we will try our best to meet your requirements.
7> We can help you to pass your official certifications.
After Sales Service
1>Factory training and remote training on installation and operation.
2>1 year remote software upgrade and long term remote troubleshooting.
3> 7*24H contact for support.
4> Engineering team support for unrecognized drone adding when require.
5> Customization and future customization after usage.
Audited Supplier 
){kind=link}
){kind=link}